where would i get the Drivebelt tension specifications ??
Feb 16, 2013 at 12:02 AM
2000 SUBARU IMPREZA
ANONYMOUS
- MEMBER
- 1 POST
- FOLLOW
Advertisement
Belt tension
(A)
replaced: 7 - 9 mm (0.276 - 0.354 in)
reused: 9 - 11 mm (0.354 - 0.433 in)
(B)*
replaced: 7.5 - 8.5 mm (0.295 - 0.335 in)
reused: 9.0 - 10.0 mm (0.354 - 0.394 in)
There is no belt (B) on models without an air conditioning. C/P crankshaft pulley
GEN Generator
P/S Power steering oil pump pulley A/C Air conditioning compressor pulley
I/P Idler pulley.
(A)
replaced: 7 - 9 mm (0.276 - 0.354 in)
reused: 9 - 11 mm (0.354 - 0.433 in)
(B)*
replaced: 7.5 - 8.5 mm (0.295 - 0.335 in)
reused: 9.0 - 10.0 mm (0.354 - 0.394 in)
There is no belt (B) on models without an air conditioning. C/P crankshaft pulley
GEN Generator
P/S Power steering oil pump pulley A/C Air conditioning compressor pulley
I/P Idler pulley.
Feb 16, 2013 at 2:04 AM